Fume Hood

MS-PP Fume Cup Board:-

1. Ergonomic design for versatile usage, ease of use, plug & play system.

2. International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

3. Company is under Make in India & MSME Certified with International standard,

certified model with duly mentioned brand name.

4. Material of Construction: - Outer Body- CRCA Sheet epoxy Powder coatedworktable also. Inner body PP Sheet wrapping  for chemical resistance.

  5. Front door: – Counter balanced weight with 5

mm toughened/tempered glass UV – protected to

protect customer from any Exposure – complete

transparent along with base structure to hold the

cabinet& ease of access

6. Air flow type: - Auto Bypass Type ,Design-

Aerodynamic

7. Baffle arrangement: - Interstitial 3-point

suction system (for light, normal & heavy fumes)

with baffle to ensure smooth and immediate exhaust

of fumes. Baffle with Additional holes for better

suction. Plenums are designed and adjusted

ergonomically.

8. Front SS -304, Hand rest/Air foil with suction

point below & Door top suction point.

9. Centrifugal Blower: Silent high efficiency

remote blower, consisting of continuous rating

motor and chemical resistant impeller.

10. Air Suction Capacity: 800-1000 CFM

confirming to international (0.5mtr/sec) face

velocity norms and as per safe fume hood airflow

pattern.

11. Statically balanced motor blower Assembly

(Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low

vibration, internally built in.

12. Sink with Water tap with drain arrangement – All are PP Materials.

13. 3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled

with internal and external inlet and outlet nozzles, color coded – Completely PP Coated

14. Top removable panel for easy access to electrical fittings and easy removable fittings

placement for ease of access during service.

15. Level adjusting screws:- Made of SS Bolts to adjust the fume hood level by approx. +10 mm.

16. Exhaust Port:- Top/Side - Smooth exhaust without any turbulence , PVC L bent

supplied along with the machine for exhaust connection from the Lab

17. Apparatus/Chemical Storage Base Cabinet :-Base cabinet ready to receive the fumehood at its top with following features:

I. Complete rigid structure to support Fume hood.

II. Epoxy powder coated rigid structure.

III. Front and back door for ease of access towards storage materials

IV. Hinged doors – Front Opening

V. Side shelves for storing of consumables

18. Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

0ptional –

1.       Electricals fittings & Fixtures: -

I. Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control –

High, Low, Medium

II. Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting

III. 1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.

2.       Internal IQ/OQ/PQ Certification

MS-PP Fume Cup Board:-

1. Ergonomic design for versatile usage, ease of use, plug & play system.

2. International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

3. Company is under Make in India & MSME Certified with International standard,

certified model with duly mentioned brand name.

4. Material of Construction: - Outer Body- CRCA Sheet epoxy Powder coatedworktable also. Inner body PP Sheet wrapping  for chemical resistance.

  5. Front door: – Counter balanced weight with 5

mm toughened/tempered glass UV – protected to

protect customer from any Exposure – complete

transparent along with base structure to hold the

cabinet& ease of access

6. Air flow type: - Auto Bypass Type ,Design-

Aerodynamic

7. Baffle arrangement: - Interstitial 3-point

suction system (for light, normal & heavy fumes)

with baffle to ensure smooth and immediate exhaust

of fumes. Baffle with Additional holes for better

suction. Plenums are designed and adjusted

ergonomically.

8. Front SS -304, Hand rest/Air foil with suction

point below & Door top suction point.

9. Centrifugal Blower: Silent high efficiency

remote blower, consisting of continuous rating

motor and chemical resistant impeller.

10. Air Suction Capacity: 800-1000 CFM

confirming to international (0.5mtr/sec) face

velocity norms and as per safe fume hood airflow

pattern.

11. Statically balanced motor blower Assembly

(Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low

vibration, internally built in.

12. Sink with Water tap with drain arrangement – All are PP Materials.

13. 3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled

with internal and external inlet and outlet nozzles, color coded – Completely PP Coated

14. Top removable panel for easy access to electrical fittings and easy removable fittings

placement for ease of access during service.

15. Level adjusting screws:- Made of SS Bolts to adjust the fume hood level by approx. +10 mm.

16. Exhaust Port:- Top/Side - Smooth exhaust without any turbulence , PVC L bent

supplied along with the machine for exhaust connection from the Lab

17. Apparatus/Chemical Storage Base Cabinet :-Base cabinet ready to receive the fumehood at its top with following features:

I. Complete rigid structure to support Fume hood.

II. Epoxy powder coated rigid structure.

III. Front and back door for ease of access towards storage materials

IV. Hinged doors – Front Opening

V. Side shelves for storing of consumables

18. Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

0ptional –

1.       Electricals fittings & Fixtures: -

I. Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control –

High, Low, Medium

II. Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting

III. 1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.

2.       Internal IQ/OQ/PQ Certification

Outer Body Ms-powder coated or HDP Body 
Inner body PP Sheet for chmical resistance
Inner body with 3-4 inlets for air, water, gas  or vacuum, All PP( polypropylene)
Extra Water nozzle- PP, SS Basin
Front left side panel with regulator for water, gas, air or vacuum
Left panel with 1-4 electrical connections
Microprocessor based PID Controller for blower on off , blower timer, blower speed contrll, Fl light On off
Lower base storage cabinet with 2-4 cabinets
Working top black granite, front arm rest complete SS-304 ,22 GAUGE
Size(ft.)
A 3x2x2 ft.
B 5x2x2 ft.
C 5x2.5x2.5 ft.

Optional :-
 
1 HIGH CFM EXHAUST SYSTEM
2 SS LINING ON WORK BENCH
3 PVC FUME DUCT
We also have 'monkey bar" type fumhood.

MS-PP Fume Cup Board:-

1. Ergonomic design for versatile usage, ease of use, plug & play system.

2. International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

3. Company is under Make in India & MSME Certified with International standard,

certified model with duly mentioned brand name.

4. Material of Construction: - Outer Body- CRCA Sheet epoxy Powder coatedworktable also. Inner body PP Sheet wrapping  for chemical resistance.

  5. Front door: – Counter balanced weight with 5

mm toughened/tempered glass UV – protected to

protect customer from any Exposure – complete

transparent along with base structure to hold the

cabinet& ease of access

6. Air flow type: - Auto Bypass Type ,Design-

Aerodynamic

7. Baffle arrangement: - Interstitial 3-point

suction system (for light, normal & heavy fumes)

with baffle to ensure smooth and immediate exhaust

of fumes. Baffle with Additional holes for better

suction. Plenums are designed and adjusted

ergonomically.

8. Front SS -304, Hand rest/Air foil with suction

point below & Door top suction point.

9. Centrifugal Blower: Silent high efficiency

remote blower, consisting of continuous rating

motor and chemical resistant impeller.

10. Air Suction Capacity: 800-1000 CFM

confirming to international (0.5mtr/sec) face

velocity norms and as per safe fume hood airflow

pattern.

11. Statically balanced motor blower Assembly

(Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low

vibration, internally built in.

12. Sink with Water tap with drain arrangement – All are PP Materials.

13. 3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled

with internal and external inlet and outlet nozzles, color coded – Completely PP Coated

14. Top removable panel for easy access to electrical fittings and easy removable fittings

placement for ease of access during service.

15. Level adjusting screws:- Made of SS Bolts to adjust the fume hood level by approx. +10 mm.

16. Exhaust Port:- Top/Side - Smooth exhaust without any turbulence , PVC L bent

supplied along with the machine for exhaust connection from the Lab

17. Apparatus/Chemical Storage Base Cabinet :-Base cabinet ready to receive the fumehood at its top with following features:

I. Complete rigid structure to support Fume hood.

II. Epoxy powder coated rigid structure.

III. Front and back door for ease of access towards storage materials

IV. Hinged doors – Front Opening

V. Side shelves for storing of consumables

18. Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

0ptional –

1.       Electricals fittings & Fixtures: -

I. Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control –

High, Low, Medium

II. Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting

III. 1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.

2.       Internal IQ/OQ/PQ Certification

Outer Body Ms-powder coated or HDP Body 
Inner body PP Sheet for chmical resistance
Inner body with 3-4 inlets for air, water, gas  or vacuum, All PP( polypropylene)
Extra Water nozzle- PP, SS Basin
Front left side panel with regulator for water, gas, air or vacuum
Left panel with 1-4 electrical connections
Microprocessor based PID Controller for blower on off , blower timer, blower speed contrll, Fl light On off
Lower base storage cabinet with 2-4 cabinets
Working top black granite, front arm rest complete SS-304 ,22 GAUGE
Size(ft.)
A 3x2x2 ft.
B 5x2x2 ft.
C 5x2.5x2.5 ft.

Optional :-
 
1 HIGH CFM EXHAUST SYSTEM
2 SS LINING ON WORK BENCH
3 PVC FUME DUCT
We also have 'monkey bar" type fumhood.

Full-SS Fume Hood-

· Ergonomic Design for Versatile Usage, ease of use, plug & play system.

 International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

 Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.

 Material Construction: Outer Body- Full  stainless steel body .

Inner body full stainless steel.

Sink with Water tap with drain arrangement – All are SS

 Work  table  - SS / granite top

 Air Suction Capacity: 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern.

 Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low vibration, internally built in.

 Front door moves vertically up-down with concealed counter balanced weights.

 FL Illumination light inside for clear view and working .

 Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting .

 Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

Standard parts –

1. Motor blower

2. Illumination, Water basin & water tap Power Socket, Ducting.

Optional

Internal IQ/OQ/PQ Certification

Microprocessor based PID controller with LCD Display for Air flow FL light on – off , Blower 3 speed control High, Low, Medium.

SS stand for hold the fume hood in case  it has no support for lab table

Full-SS Fume Hood-

· Ergonomic Design for Versatile Usage, ease of use, plug & play system.

 International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

 Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.

 Material Construction: Outer Body- Full  stainless steel body .

Inner body full stainless steel.

Sink with Water tap with drain arrangement – All are SS

 Work  table  - SS / granite top

 Air Suction Capacity: 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern.

 Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low vibration, internally built in.

 Front door moves vertically up-down with concealed counter balanced weights.

 FL Illumination light inside for clear view and working .

 Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting .

 Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

Standard parts –

1. Motor blower

2. Illumination, Water basin & water tap Power Socket, Ducting.

Optional

Internal IQ/OQ/PQ Certification

Microprocessor based PID controller with LCD Display for Air flow FL light on – off , Blower 3 speed control High, Low, Medium.

SS stand for hold the fume hood in case  it has no support for lab table

Ergonomic design for versatile usage, ease of use, plug & play system.

2. International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.

3. Company is under Make in India & MSME Certified with International standard,

certified model with duly mentioned brand name.

4. Material of Construction: - Outer Body- CRCA Sheet epoxy Powder coated worktable also. Inner body stainless steel .. Front door: – Counter balanced weight with 5

mm toughened/tempered glass UV – protected to

protect customer from any Exposure – complete

transparent along with base structure to hold the

cabinet& ease of access

6. Air flow type: - Auto Bypass Type ,Design-

Aerodynamic

7. Baffle arrangement: - Interstitial 3-point

suction system (for light, normal & heavy fumes)

with baffle to ensure smooth and immediate exhaust

of fumes. Baffle with Additional holes for better

suction. Plenums are designed and adjusted

ergonomically.

8. Front SS -304, Hand rest/Air foil with suction

point below & Door top suction point.

9. Centrifugal Blower: Silent high efficiency

remote blower, consisting of continuous rating

motor and chemical resistant impeller.

10. Air Suction Capacity: 800-1000 CFM

confirming to international (0.5mtr/sec) face

velocity norms and as per safe fume hood airflow

pattern.

11. Statically balanced motor blower Assembly

(Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low

vibration, internally built in.

12. Sink with Water tap with drain arrangement – All are PP Materials.

13. 3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled

with internal and external inlet and outlet nozzles, color coded – Completely PP Coated

14. Top removable panel for easy access to electrical fittings and easy removable fittings

placement for ease of access during service.

15. Level adjusting screws:- Made of SS Bolts to adjust the fume hood level by approx. +10 mm.

16. Exhaust Port:- Top/Side - Smooth exhaust without any turbulence , PVC L bent

supplied along with the machine for exhaust connection from the Lab

17. Apparatus/Chemical Storage Base Cabinet :-Base cabinet ready to receive the fumehood at its top with following features:

I. Complete rigid structure to support Fume hood.

II. Epoxy powder coated rigid structure.

III. Front and back door for ease of access towards storage materials

IV. Hinged doors – Front Opening

V. Side shelves for storing of consumables

18. Power supply - 220-230 V, 50-60 Hz, 5/15 amps power cord.

0ptional –

1.       Electricals fittings & Fixtures: -

I. Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control –

High, Low, Medium

II. Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting

III. 1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.

2.       Internal IQ/OQ/PQ Certification